BURTONS - Non Contact Auto Top Up
Product Description
The New Burtons Auto Top-up system is designed to keep your pond at constant water level in our most advanced way.
The sensor sits on the outside of your filter/ skimmer, when fitting to a drum filter the sensor need to be fitted the inlet side. (Only fit to your filter system on gravity fed setups)
When the water level of your pond drops below the sensor it will open the solenoid to your mains water and top up the pond. Once the water has risen back up to the sensor it will shut the solenoid off again stopping the water flow.
With all ponds keeping a constant water level is important and more so for systems with a gravity fed drum filter. Our unit comes as standard with a 20mm water level differential bracket. Just loosen off the screws to move the sensor up or down.
1/2 BSP solenoid valve with 1.5m cable
Non-Contact Digital Sensor
Low Voltage
1 year guarantee
Fresh water can return anywhere back in to your system
Product Description
The New Burtons Auto Top-up system is designed to keep your pond at constant water level in our most advanced way.
The sensor sits on the outside of your filter/ skimmer, when fitting to a drum filter the sensor need to be fitted the inlet side. (Only fit to your filter system on gravity fed setups)
When the water level of your pond drops below the sensor it will open the solenoid to your mains water and top up the pond. Once the water has risen back up to the sensor it will shut the solenoid off again stopping the water flow.
With all ponds keeping a constant water level is important and more so for systems with a gravity fed drum filter. Our unit comes as standard with a 20mm water level differential bracket. Just loosen off the screws to move the sensor up or down.
1/2 BSP solenoid valve with 1.5m cable
Non-Contact Digital Sensor
Low Voltage
1 year guarantee
Fresh water can return anywhere back in to your system
Product Description
The New Burtons Auto Top-up system is designed to keep your pond at constant water level in our most advanced way.
The sensor sits on the outside of your filter/ skimmer, when fitting to a drum filter the sensor need to be fitted the inlet side. (Only fit to your filter system on gravity fed setups)
When the water level of your pond drops below the sensor it will open the solenoid to your mains water and top up the pond. Once the water has risen back up to the sensor it will shut the solenoid off again stopping the water flow.
With all ponds keeping a constant water level is important and more so for systems with a gravity fed drum filter. Our unit comes as standard with a 20mm water level differential bracket. Just loosen off the screws to move the sensor up or down.
1/2 BSP solenoid valve with 1.5m cable
Non-Contact Digital Sensor
Low Voltage
1 year guarantee
Fresh water can return anywhere back in to your system